This program will edit all the lines of your .tap file, adding G84 and depths.  This save time making edits, reduces errors.

Instructions for use

Copyright 2005

Auto Edit for Peck Tapping

Select the file you want to edit.  Must be an ASCII file like a .txt or .tap.

Enter tool number of tap that is in program, enter tap depth amount, starting plane, and peck increment.  The boxes are filled with default settings.  Modify as needed.

Listings will show the part of your program that will change. If changes are correct, make changes.  Feed rate will not be changed.

A new file will be created.  Your file will NOT be modified.  The default will add G84 to the name of your program.  Program will automatically close when finished.

This calculator is for reference. JanProducts gives no warranty, express or implied, as to the accuracy, reliability and completeness of any information, formulae or calculations provided through the use of the calculator and does not accept any liability for loss or damage of whatsoever nature, which may be attributable to the reliance on and use of the calculator.

J A N Products
Henderson, NV 89015

To purchase - click here - $9.99

For Windows desktops

Contact | JANTIPS | Thread Calculator | Metric Converter | Speeds and Feeds calc | Distance across corners | CounterSink Calculator | Tap Feed Calculator | Bolt Circle Calculator | Lathe Cutting Time | Milling Time | Tapping Editor | Controller_Home | Controller_Diagrams | Controller Install | Controller Software | KENO instructions | Controller accessory | Dap or pick